.png)
Analog Controllers
This analog controller is used for simple applications with on/off or P control, with digital display.
- Build-in Laser Trim ASIC
- Easy to change range
- ON-OFFor time proportional selectable
- Compact, only 53mm in depth
- Wide selection of control output option
- Wide selection of ranges
- Safety : UL, CSA
- EMC, LVD : CE
| INPUT | |
|---|---|
| Thermocouple (T/C) | Type J, K |
| RTD | 3-wires PT 100 ohms, DIN or JIS |
| Range | See ordering information |
| Accuracy | ±2% of span (BTC-402, BTC-401), ±1% of span (BTC-404) |
| Cold Junction Compensatin | ±0.1°C / 1°C |
| Rejection of RTD Lead Resistance | ( 0.1°C - 0.025% of PV reading) / ohm |
| Sensor Break Protection | Upscale |
| External Resistance | 100 ohms max. |
| Normal Mode Rejection | 60 dB |
| Common Mode Rejection | 120 dB |
| Sample Rate | 3 times / second |
| CONTROL | |
|---|---|
| Proportion Band | 2.2% of span |
| ON-OFF Hysteresis | 1 % of span |
| Cycle Time | 20 seconds for relay output, 1 second for pulsed voltage output, 0.02 second for linear current or voltage output.. |
| Control Action | Reverse action |
| OUTPUT | |
|---|---|
| Control | Relay 5A / 240V max. resistive load |
| Pulsed Voltage | 20mA / 32VDC max. |
| Current | 4-20mA, 0-20mA, max. load 500 ohms |
| Voltage | 0- 10V, min. load 500k ohms |
| Alarm | Relay output, 2A / 240VAC max. resistive load |
| ADJUSTMENT | |
|---|---|
| Set point | Single turn wirewound potentiometer |
| Alarm | Deviation alarm, adjustable ±10% of span |
| Manuel Reset | Adjustable 2.6% of span (BTC-404, 402 only) |
| Resolution of set point | 0.2% of span |
| Accuracy of set point | ±2% of span |
| Repeatability of set point | ±0.1 % of span |
| INDICATION | |
|---|---|
| Process Indicator | BTC-402 : Deviation meter BTC-404: 0.5” red 3-1/2 dight LED display |
| Status Indicator | ON red LED Lamp |
| Alarm Indicator | ON red LED Lamp |
| POWER | |
|---|---|
| Rating | BTC-402, BTC-401: 100-130VAC or 200-240VAC,50 / 60Hz |
| Consumption | Less than 5VA |
| ENVIRONMENTAL & PHYSICAL | |
|---|---|
| Operating Temperature | 0-50°C |
| Humidity | 0 to 90% RH (non-codensing) |
| Insulation | 20M ohms min. (500VDC) |
| Breakdown | AC2000V，50/60Hz，1 minute |
| Vibraton | 10-55Hz，amplitude 1mm |
| Shock | 200 m/s² (20g) |
| Weight | BTC-404: 280 grams, BTC-402: 360 grams, BTC-401: 330 grams |
| Dimension | 96(W)X96(H)X53mm (depth behind panel) |
| Panel cutout | 92 X 92mm |
| Documentation | ||
|---|---|---|
| Brochure | CT404_402_401 ( 144.18 KB / 3 pages ) | Download |
Plastic/rubber industry
It is installed on the heating material tube of the injection molding machine to control the temperature of the raw material, effectively control the liquid temperature of the plastic and improve the molding quality of the product.
Installed on the hot runner system for temperature control of runners and gates to stabilize the quality of the plastic.
Temperature control on the mold temperature machine, indirectly adjusting the temperature of the mold by adjusting the temperature of the hot fluid, can improve the production efficiency of the product and reduce the generation of defective products.
Electric heating furnace industry
Vacuum furnace equipment / vacuum melting / vacuum heat treatment
A new algorithm for PID adjustment using fuzzy rules is used to adjust the PID algorithm to eliminate the PID saturation integral phenomenon when the error is large. When the error is small, the improved PID algorithm is used for adjustment and can be automatically adjusted. Learn and memorize some of the characteristics of the controlled object to optimize the effect
Semiconductor industry
The temperature control of the electric heating cloth package is often used for the heating of the exhaust pipe valve parts of the semiconductor factory, the panel factory, or the special steel cylinder.
In the semiconductor temperature process control program, the heating system of the chamber, such as the decane process, the dichloromethane process
Ceramic / kiln / glass industry
Ceramic sintering furnace:
The heating process on the sintering furnace controls the heating rate to obtain a finished product with better quality and stability.
Electric kiln:
Temperature adjustment during kiln firing to obtain a finished product with better quality and stability.
Fiber machinery
Dyeing machine:
control the temperature during dyeing to a suitable range, which in turn reduces chromatic aberration and improves the quality of dyed products.
Fiber dryer:
The temperature during drying is controlled within a suitable range to improve the fiber product.
other
Temperature Controller
Constant temperature and humidity machine
Heating/cooling air conditioning
Pool/bathroom temperature control facility
| □ | □ | □ | □ | □ | □ | □ | □ |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| 1 Power Input | BTC-402, BTC-401: 3: 100-130VAC, 50Hz/60Hz / 200-240VAC, 50Hz/60Hz 9: Other BTC-404: 4: 90-264VAC 9: Other |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 Signal Input | 1: Type J thermocouple 2: Type K thermocouple 3: PT 100 ohm DIN 4: PT 100 ohm JIS 9: Other |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3 Range Code |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4 Control Mode |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5 Output I | 1: Relay, rated 5A/240VAC resistive 2: Pulsed voltage to drive SSR, rated 20mA/24V 3: 4-20mA linear, max. load 500 ohms 4: 0-20mA linear, max. load 500 ohms 5: 0-10V linear, min. load 500k ohms 9: Other |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6 Output II | 0: None | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7 Alarm | 0: None 1: Deviation alarm relay output, rated 2A/24OVAC max. resistive load |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 8 Communication | 0: None | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
* Please refer detailed conversion from full technical information
